- Highest Quality, Full Color, "Anti-Slip" Grip. High Gloss Finish
- Precision Cut for Xbox One controller
- Easy Install & Removal. Leaves Behind No Sticky Residue.Will not Scratch, Fade (UV Resistant) or Peel
- To install: 1. Clean the surface thoroughly. 2. Put on each piece of decal carefully. 3. Apply hot air the decal surface for the best result (optional).
- Controller Not Included.
GameXcel ®Xbox One Skin Sticker is printed with super-high resolution graphics. It protects your devices from scratching, fading, and peeling. Our patented advanced air-release vinyl guarantees a perfect installation.
Package Contains
- One(1) Xbox One Controller Skin(Sticker)
- Actual controller not included.
- One(1) Xbox One Controller Skin(Sticker)
- Actual controller not included.
Install
1) Clean your Xbox One Wireless Controller surface as thoroughly as possible. Use rubbing alcohol on a lint-free cloth to remove any grease or other contaminates. Most issues of non-sticking are due to some type of oil or grease that is on the unit PRIOR to installation.
2) Peel one piece of the Skin from the paper liner. NOT to let the adhesive side touch anything.
3) Determine the placement, apply the Skin to the surface using your fingers or the side of your thumb, starting from one corner and working your way across the surface.
4) If a decal sticker piece is not going on straight, you can gently lift the sticker back up. Do not stretch it from its original size.
5) If installed slowly and carefully, there should be NO air bubbles left under the sticker skin. Any air that may become trapped under the sticker skin during installation will go away in time. You can also use a pin to break it.
6) During the cold weather or for a better result, apply hot air to the decal surface to activate chemical agent after putting the sticker skin on your Controller. Especially heat up the edge surface. Allow at least 3 hours for cool down before touching the decal sticker skin. Using a hair dryer or hot air gun is fine.
1) Clean your Xbox One Wireless Controller surface as thoroughly as possible. Use rubbing alcohol on a lint-free cloth to remove any grease or other contaminates. Most issues of non-sticking are due to some type of oil or grease that is on the unit PRIOR to installation.
2) Peel one piece of the Skin from the paper liner. NOT to let the adhesive side touch anything.
3) Determine the placement, apply the Skin to the surface using your fingers or the side of your thumb, starting from one corner and working your way across the surface.
4) If a decal sticker piece is not going on straight, you can gently lift the sticker back up. Do not stretch it from its original size.
5) If installed slowly and carefully, there should be NO air bubbles left under the sticker skin. Any air that may become trapped under the sticker skin during installation will go away in time. You can also use a pin to break it.
6) During the cold weather or for a better result, apply hot air to the decal surface to activate chemical agent after putting the sticker skin on your Controller. Especially heat up the edge surface. Allow at least 3 hours for cool down before touching the decal sticker skin. Using a hair dryer or hot air gun is fine.
My review:
This decal was fairly easy to install. Ensure your surface is clean before application for best results. The quality of the paper and printing seems to be pretty good. It takes a little patience to line it up perfectly and put it on the controller. If you mess up it can easily be removed and re-positioned. The adhesive is good, I was able to take the skin on and off until it looked perfect without it losing stickiness or tearing. I really don't have any idea how long it's going to last, but so far I've had it for a little over a week and haven't had any problems with it peeling or coming off at any point. My only dislike is that there were no instructions included. Overall its a good skin, it goes on easy, looks good, and fits perfectly.
To find out more about Xbox One controller sticker Green Digicamo by GameXcel visit Amazon.
I received one or more of the products mentioned above free or at a discount rate for review purposes. Regardless, I only recommend products or services I use personally and believe will be good for my readers.
To find out more about Xbox One controller sticker Green Digicamo by GameXcel visit Amazon.
I received one or more of the products mentioned above free or at a discount rate for review purposes. Regardless, I only recommend products or services I use personally and believe will be good for my readers.
No comments:
Post a Comment